dmesg - x264 1800x
random: get_random_bytes called from start_kernel+0x42/0x4e9 with crng_init=0
Linux version 4.13.0-39-generic (buildd@lgw01-amd64-038) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #44-Ubuntu SMP Thu Apr 5 14:25:01 UTC 2018 (Ubuntu 4.13.0-39.44-generic 4.13.16)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000dad46fff] usable
BIOS-e820: [mem 0x00000000dad47000-0x00000000dc248fff] reserved
BIOS-e820: [mem 0x00000000dc249000-0x00000000dc342fff] usable
BIOS-e820: [mem 0x00000000dc343000-0x00000000dc71bfff] ACPI NVS
BIOS-e820: [mem 0x00000000dc71c000-0x00000000dd0effff] reserved
BIOS-e820: [mem 0x00000000dd0f0000-0x00000000dd182fff] type 20
BIOS-e820: [mem 0x00000000dd183000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0xdc343000 ACPI=0xdc343000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 ESRT=0xd978d398 MEMATTR=0xd95c6698
random: fast init done
SMBIOS 3.0.0 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X370 Taichi, BIOS P4.40 02/07/2018
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000d978d398 to 0x00000000d978d3d0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9d7cc0096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x324b2e000, 0x324b2efff] PGTABLE
BRK [0x324b2f000, 0x324b2ffff] PGTABLE
BRK [0x324b30000, 0x324b30fff] PGTABLE
BRK [0x324b31000, 0x324b31fff] PGTABLE
BRK [0x324b32000, 0x324b32fff] PGTABLE
BRK [0x324b33000, 0x324b33fff] PGTABLE
BRK [0x324b34000, 0x324b34fff] PGTABLE
BRK [0x324b35000, 0x324b35fff] PGTABLE
BRK [0x324b36000, 0x324b36fff] PGTABLE
BRK [0x324b37000, 0x324b37fff] PGTABLE
BRK [0x324b38000, 0x324b38fff] PGTABLE
BRK [0x324b39000, 0x324b39fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x31ebd000-0x34f55fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DC343000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DC343098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DC349BE8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170531/tbfadt-658)
ACPI: DSDT 0x00000000DC3431E8 0069FB (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DC704E00 000040
ACPI: APIC 0x00000000DC349D00 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DC349DE0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DC349E28 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DC349EC8 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: CRAT 0x00000000DC352B60 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DC353AB0 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DC353AE0 002CCB (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DC3567B0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT 0x00000000DC3567F0 0002B0 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DC356AA0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DC356AD8 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DC356B00 000042 (v01 00000000 00000000)
ACPI: BGRT 0x00000000DC356B48 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: IVRS 0x00000000DC356B80 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DC356C50 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x00000000DC356D48 001993 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: WSMT 0x00000000DC3586E0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f355000-0x41f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000003ffffff]
node 0: [mem 0x000000000400a000-0x0000000009cfffff]
node 0: [mem 0x000000000a000000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x00000000dad46fff]
node 0: [mem 0x00000000dc249000-0x00000000dc342fff]
node 0: [mem 0x00000000dd183000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4177075
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14055 pages used for memmap
DMA32 zone: 899476 pages, LIFO batch:31
Normal zone: 51150 pages used for memmap
Normal zone: 3273600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0xdad47000-0xdc248fff]
PM: Registered nosave memory: [mem 0xdc343000-0xdc71bfff]
PM: Registered nosave memory: [mem 0xdc71c000-0xdd0effff]
PM: Registered nosave memory: [mem 0xdd0f0000-0xdd182fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ffff9d80dec00000 s146584 r8192 d29544 u262144
pcpu-alloc: s146584 r8192 d29544 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4111779
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16246784K/16708300K available (12300K kernel code, 2482K rwdata, 4000K rodata, 2376K init, 2372K bss, 461516K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 37850 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3600.011 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.02 BogoMIPS (lpj=14400044)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
FEATURE SPEC_CTRL Not Present
FEATURE IBPB Not Present
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V2 mitigation: Mitigation: Full AMD retpoline
Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Ryzen 7 1800X Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (115200.35 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xdc343000-0xdc71bfff] (4034560 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 0:12:57, date: 05/01/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:03:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe4a0000-0xfe4a7fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:03:00.1: reg 0x24: [mem 0xfe480000-0xfe49ffff]
pci 0000:03:00.1: reg 0x30: [mem 0xfe400000-0xfe47ffff pref]
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-2c]
pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfe100000-0xfe4fffff]
pci 0000:1d:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:00.0: PME# supported from D3hot D3cold
pci 0000:1d:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:02.0: PME# supported from D3hot D3cold
pci 0000:1d:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:03.0: PME# supported from D3hot D3cold
pci 0000:1d:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:04.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 1d-2c]
pci 0000:03:00.2: bridge window [io 0xd000-0xefff]
pci 0000:03:00.2: bridge window [mem 0xfe100000-0xfe3fffff]
pci 0000:1d:00.0: PCI bridge to [bus 1e]
pci 0000:20:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:20:00.0: reg 0x10: [io 0xe050-0xe057]
pci 0000:20:00.0: reg 0x14: [io 0xe040-0xe043]
pci 0000:20:00.0: reg 0x18: [io 0xe030-0xe037]
pci 0000:20:00.0: reg 0x1c: [io 0xe020-0xe023]
pci 0000:20:00.0: reg 0x20: [io 0xe000-0xe01f]
pci 0000:20:00.0: reg 0x24: [mem 0xfe300000-0xfe3001ff]
pci 0000:1d:02.0: PCI bridge to [bus 20]
pci 0000:1d:02.0: bridge window [io 0xe000-0xefff]
pci 0000:1d:02.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:21:00.0: [1b21:1184] type 01 class 0x060400
pci 0000:21:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1d:03.0: PCI bridge to [bus 21-2b]
pci 0000:1d:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:1d:03.0: bridge window [mem 0xfe100000-0xfe2fffff]
pci 0000:26:01.0: [1b21:1184] type 01 class 0x060400
pci 0000:26:01.0: PME# supported from D0 D3hot D3cold
pci 0000:26:03.0: [1b21:1184] type 01 class 0x060400
pci 0000:26:03.0: PME# supported from D0 D3hot D3cold
pci 0000:26:05.0: [1b21:1184] type 01 class 0x060400
pci 0000:26:05.0: PME# supported from D0 D3hot D3cold
pci 0000:26:07.0: [1b21:1184] type 01 class 0x060400
pci 0000:26:07.0: PME# supported from D0 D3hot D3cold
pci 0000:21:00.0: PCI bridge to [bus 26-2b]
pci 0000:21:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:21:00.0: bridge window [mem 0xfe100000-0xfe2fffff]
pci 0000:27:00.0: [8086:24fb] type 00 class 0x028000
pci 0000:27:00.0: reg 0x10: [mem 0xfe200000-0xfe201fff 64bit]
pci 0000:27:00.0: PME# supported from D0 D3hot D3cold
pci 0000:26:01.0: PCI bridge to [bus 27]
pci 0000:26:01.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:26:03.0: PCI bridge to [bus 28]
pci 0000:2a:00.0: [8086:1539] type 00 class 0x020000
pci 0000:2a:00.0: reg 0x10: [mem 0xfe100000-0xfe11ffff]
pci 0000:2a:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:2a:00.0: reg 0x1c: [mem 0xfe120000-0xfe123fff]
pci 0000:2a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:26:05.0: PCI bridge to [bus 2a]
pci 0000:26:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:26:05.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:26:07.0: PCI bridge to [bus 2b]
pci 0000:1d:04.0: PCI bridge to [bus 2c]
pci 0000:2d:00.0: [1002:67b0] type 00 class 0x030000
pci 0000:2d:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:2d:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:2d:00.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:2d:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
pci 0000:2d:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
pci 0000:2d:00.0: BAR 0: assigned to efifb
pci 0000:2d:00.0: supports D1 D2
pci 0000:2d:00.0: PME# supported from D1 D2 D3hot
pci 0000:2d:00.1: [1002:aac8] type 00 class 0x040300
pci 0000:2d:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
pci 0000:2d:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 2d]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
pci 0000:2e:00.0: [1022:145a] type 00 class 0x130000
pci 0000:2e:00.2: [1022:1456] type 00 class 0x108000
pci 0000:2e:00.2: reg 0x18: [mem 0xfe600000-0xfe6fffff]
pci 0000:2e:00.2: reg 0x24: [mem 0xfe700000-0xfe701fff]
pci 0000:2e:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:2e:00.3: reg 0x10: [mem 0xfe500000-0xfe5fffff 64bit]
pci 0000:2e:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 2e]
pci 0000:00:07.1: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:2f:00.0: [1022:1455] type 00 class 0x130000
pci 0000:2f:00.2: [1022:7901] type 00 class 0x010601
pci 0000:2f:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
pci 0000:2f:00.2: PME# supported from D3hot D3cold
pci 0000:2f:00.3: [1022:1457] type 00 class 0x040300
pci 0000:2f:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
pci 0000:2f:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 2f]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:2d:00.0: vgaarb: setting as boot VGA device
pci 0000:2d:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:2d:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xdad47000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdc343000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0280-0x028f] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: [io 0x02a0-0x02af] has been reserved
system 00:03: [io 0x02b0-0x02bf] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:1d:00.0: PCI bridge to [bus 1e]
pci 0000:1d:02.0: PCI bridge to [bus 20]
pci 0000:1d:02.0: bridge window [io 0xe000-0xefff]
pci 0000:1d:02.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:26:01.0: PCI bridge to [bus 27]
pci 0000:26:01.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:26:03.0: PCI bridge to [bus 28]
pci 0000:26:05.0: PCI bridge to [bus 2a]
pci 0000:26:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:26:05.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:26:07.0: PCI bridge to [bus 2b]
pci 0000:21:00.0: PCI bridge to [bus 26-2b]
pci 0000:21:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:21:00.0: bridge window [mem 0xfe100000-0xfe2fffff]
pci 0000:1d:03.0: PCI bridge to [bus 21-2b]
pci 0000:1d:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:1d:03.0: bridge window [mem 0xfe100000-0xfe2fffff]
pci 0000:1d:04.0: PCI bridge to [bus 2c]
pci 0000:03:00.2: PCI bridge to [bus 1d-2c]
pci 0000:03:00.2: bridge window [io 0xd000-0xefff]
pci 0000:03:00.2: bridge window [mem 0xfe100000-0xfe3fffff]
pci 0000:00:01.3: PCI bridge to [bus 03-2c]
pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfe100000-0xfe4fffff]
pci 0000:00:03.1: PCI bridge to [bus 2d]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 2e]
pci 0000:00:07.1: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:00:08.1: PCI bridge to [bus 2f]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:03: resource 0 [io 0xd000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe4fffff]
pci_bus 0000:1d: resource 0 [io 0xd000-0xefff]
pci_bus 0000:1d: resource 1 [mem 0xfe100000-0xfe3fffff]
pci_bus 0000:20: resource 0 [io 0xe000-0xefff]
pci_bus 0000:20: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:21: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:21: resource 1 [mem 0xfe100000-0xfe2fffff]
pci_bus 0000:26: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:26: resource 1 [mem 0xfe100000-0xfe2fffff]
pci_bus 0000:27: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:2a: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:2a: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:2d: resource 0 [io 0xf000-0xffff]
pci_bus 0000:2d: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:2d: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref]
pci_bus 0000:2e: resource 1 [mem 0xfe500000-0xfe7fffff]
pci_bus 0000:2f: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:2d:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 49764K
AMD-Vi: IOMMU performance counters supported
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.3 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:03.0 to group 3
iommu: Adding device 0000:00:03.1 to group 4
iommu: Adding device 0000:00:04.0 to group 5
iommu: Adding device 0000:00:07.0 to group 6
iommu: Adding device 0000:00:07.1 to group 7
iommu: Adding device 0000:00:08.0 to group 8
iommu: Adding device 0000:00:08.1 to group 9
iommu: Adding device 0000:00:14.0 to group 10
iommu: Adding device 0000:00:14.3 to group 10
iommu: Adding device 0000:00:18.0 to group 11
iommu: Adding device 0000:00:18.1 to group 11
iommu: Adding device 0000:00:18.2 to group 11
iommu: Adding device 0000:00:18.3 to group 11
iommu: Adding device 0000:00:18.4 to group 11
iommu: Adding device 0000:00:18.5 to group 11
iommu: Adding device 0000:00:18.6 to group 11
iommu: Adding device 0000:00:18.7 to group 11
iommu: Adding device 0000:03:00.0 to group 12
iommu: Adding device 0000:03:00.1 to group 12
iommu: Adding device 0000:03:00.2 to group 12
iommu: Adding device 0000:1d:00.0 to group 12
iommu: Adding device 0000:1d:02.0 to group 12
iommu: Adding device 0000:1d:03.0 to group 12
iommu: Adding device 0000:1d:04.0 to group 12
iommu: Adding device 0000:20:00.0 to group 12
iommu: Adding device 0000:21:00.0 to group 12
iommu: Adding device 0000:26:01.0 to group 12
iommu: Adding device 0000:26:03.0 to group 12
iommu: Adding device 0000:26:05.0 to group 12
iommu: Adding device 0000:26:07.0 to group 12
iommu: Adding device 0000:27:00.0 to group 12
iommu: Adding device 0000:2a:00.0 to group 12
iommu: Adding device 0000:2d:00.0 to group 13
iommu: Using direct mapping for device 0000:2d:00.0
iommu: Adding device 0000:2d:00.1 to group 13
iommu: Adding device 0000:2e:00.0 to group 14
iommu: Adding device 0000:2e:00.2 to group 15
iommu: Adding device 0000:2e:00.3 to group 16
iommu: Adding device 0000:2f:00.0 to group 17
iommu: Adding device 0000:2f:00.2 to group 18
iommu: Adding device 0000:2f:00.3 to group 19
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1525133577.729:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.3: AER enabled with IRQ 282
pcieport 0000:00:03.1: AER enabled with IRQ 283
pcieport 0000:00:07.1: AER enabled with IRQ 284
pcieport 0000:00:08.1: AER enabled with IRQ 286
pcieport 0000:00:01.3: Signaling PME with IRQ 282
pcieport 0000:00:03.1: Signaling PME with IRQ 283
pcieport 0000:00:07.1: Signaling PME with IRQ 284
pcieport 0000:00:08.1: Signaling PME with IRQ 286
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000418
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-39-generic xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-39-generic xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:2e:00.3: xHCI Host Controller
xhci_hcd 0000:2e:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:2e:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.0-39-generic xhci-hcd
usb usb3: SerialNumber: 0000:2e:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:2e:00.3: xHCI Host Controller
xhci_hcd 0000:2e:00.3: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.0-39-generic xhci-hcd
usb usb4: SerialNumber: 0000:2e:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
efivars: duplicate variable: DeploymentModeNv-97e8965f-c761-4f48-b6e4-9ffa9cb2a2d6
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08001129
microcode: CPU1: patch_level=0x08001129
microcode: CPU2: patch_level=0x08001129
microcode: CPU3: patch_level=0x08001129
microcode: CPU4: patch_level=0x08001129
microcode: CPU5: patch_level=0x08001129
microcode: CPU6: patch_level=0x08001129
microcode: CPU7: patch_level=0x08001129
microcode: CPU8: patch_level=0x08001129
microcode: CPU9: patch_level=0x08001129
microcode: CPU10: patch_level=0x08001129
microcode: CPU11: patch_level=0x08001129
microcode: CPU12: patch_level=0x08001129
microcode: CPU13: patch_level=0x08001129
microcode: CPU14: patch_level=0x08001129
microcode: CPU15: patch_level=0x08001129
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (807207832, 0)->(968359071, -161151239)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: d61c4a277705eb43423927110d69077c77836d36'
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI db list
Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI dbx list
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 2:232:202
acpi device:57: hash matches
acpi device:2a: hash matches
rtc_cmos 00:02: setting system clock to 2018-05-01 00:12:58 UTC (1525133578)
powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2376K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2024K
Freeing unused kernel memory: 96K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:03:00.1: version 3.0
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
PTP clock support registered
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
dca service started, version 1.12.1
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480100 irq 304
ata2: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480180 irq 304
ata3: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480200 irq 304
ata4: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480280 irq 304
ata5: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480300 irq 304
ata6: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480380 irq 304
ata7: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480400 irq 304
ata8: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480480 irq 304
ahci 0000:20:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:20:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:20:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host8: ahci
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
scsi host9: ahci
ata9: SATA max UDMA/133 abar m512@0xfe300000 port 0xfe300100 irq 305
ata10: SATA max UDMA/133 abar m512@0xfe300000 port 0xfe300180 irq 305
ahci 0000:2f:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:2f:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host10: ahci
ata11: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808100 irq 307
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
Found CRAT image with size=3920
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=16 id_base=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (HAWAII 0x1002:0x67B0 0x148C:0x2342 0x00).
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
radeon 0000:2d:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: C67101
radeon 0000:2d:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
radeon 0000:2d:00.0: GTT: 2048M 0x0000000100000000 - 0x000000017FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 512bits DDR
[TTM] Zone kernel: Available graphics memory: 8209632 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 4096M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading hawaii Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 1022:1453 = 737903/e
[drm] radeon: dpm initialized
[drm] Found UVD firmware Version: 1.64 Family ID: 9
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 1022:1453 = 737903/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:2d:00.0: WB enabled
radeon 0000:2d:00.0: fence driver on ring 0 use gpu addr 0x0000000100000c00 and cpu addr 0xffff9d80c02fac00
radeon 0000:2d:00.0: fence driver on ring 1 use gpu addr 0x0000000100000c04 and cpu addr 0xffff9d80c02fac04
radeon 0000:2d:00.0: fence driver on ring 2 use gpu addr 0x0000000100000c08 and cpu addr 0xffff9d80c02fac08
radeon 0000:2d:00.0: fence driver on ring 3 use gpu addr 0x0000000100000c0c and cpu addr 0xffff9d80c02fac0c
radeon 0000:2d:00.0: fence driver on ring 4 use gpu addr 0x0000000100000c10 and cpu addr 0xffff9d80c02fac10
radeon 0000:2d:00.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffb18b83438d30
radeon 0000:2d:00.0: fence driver on ring 6 use gpu addr 0x0000000100000c18 and cpu addr 0xffff9d80c02fac18
radeon 0000:2d:00.0: fence driver on ring 7 use gpu addr 0x0000000100000c1c and cpu addr 0xffff9d80c02fac1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:2d:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
pps pps0: new PPS source ptp0
igb 0000:2a:00.0: added PHC on eth0
igb 0000:2a:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:2a:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:85:c2:51:e8:1f
igb 0000:2a:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:2a:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:2a:00.0 enp42s0: renamed from eth0
usb 3-2: new full-speed USB device number 2 using xhci_hcd
usb 2-7: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-7: New USB device found, idVendor=8564, idProduct=1000
usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-7: Product: Mass Storage Device
usb 2-7: Manufacturer: JetFlash
usb 2-7: SerialNumber: 3580910131
usb-storage 2-7:1.0: USB Mass Storage device detected
scsi host11: usb-storage 2-7:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata9: SATA link down (SStatus 0 SControl 300)
[drm] ring test on 6 succeeded in 18 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
ata11: SATA link down (SStatus 0 SControl 300)
usb 3-2: New USB device found, idVendor=044f, idProduct=b108
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: T.Flight Hotas X
usb 3-2: Manufacturer: Thrustmaster
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Thrustmaster T.Flight Hotas X as /devices/pci0000:00/0000:00:07.1/0000:2e:00.3/usb3/3-2/3-2:1.0/0003:044F:B108.0001/input/input2
hid-generic 0003:044F:B108.0001: input,hidraw0: USB HID v1.00 Joystick [Thrustmaster T.Flight Hotas X] on usb-0000:2e:00.3-2/input0
usb 1-2: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-3: new full-speed USB device number 3 using xhci_hcd
usb 1-2: New USB device found, idVendor=046d, idProduct=c07d
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: Gaming Mouse G502
usb 1-2: Manufacturer: Logitech
usb 1-2: SerialNumber: 018733793038
[drm] ib test on ring 1 succeeded in 0 usecs
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2:1.0/0003:046D:C07D.0002/input/input3
hid-generic 0003:046D:C07D.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:03:00.0-2/input0
usb 3-3: New USB device found, idVendor=08bb, idProduct=2900
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Audio CODEC
usb 3-3: Manufacturer: Burr-Brown from TI
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2:1.1/0003:046D:C07D.0003/input/input4
input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:07.1/0000:2e:00.3/usb3/3-3/3-3:1.3/0003:08BB:2900.0004/input/input5
tsc: Refined TSC clocksource calibration: 3600.296 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e56a683c6, max_idle_ns: 440795211701 ns
hid-generic 0003:046D:C07D.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:03:00.0-2/input1
hid-generic 0003:08BB:2900.0004: input,hidraw3: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:2e:00.3-3/input3
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: Corsair Neutron GTX SSD, M206, max UDMA/133
ata2.00: 244209168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Corsair Neutron M206 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 244209168 512-byte logical blocks: (125 GB/116 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-5: new low-speed USB device number 3 using xhci_hcd
scsi 11:0:0:0: Direct-Access JetFlash Transcend 16GB 1.00 PQ: 0 ANSI: 5
sd 11:0:0:0: Attached scsi generic sg2 type 0
sd 11:0:0:0: [sdc] 30871552 512-byte logical blocks: (15.8 GB/14.7 GiB)
sd 11:0:0:0: [sdc] Write Protect is off
sd 11:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 11:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
sdc: sdc1
sd 11:0:0:0: [sdc] Attached SCSI removable disk
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usb 1-5: New USB device found, idVendor=1c4f, idProduct=0024
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB Keyboard
usb 1-5: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.0/0003:1C4F:0024.0005/input/input6
hid-generic 0003:1C4F:0024.0005: input,hidraw4: USB HID v1.11 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:03:00.0-5/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.1/0003:1C4F:0024.0006/input/input7
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30003, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0003 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg3 type 0
hid-generic 0003:1C4F:0024.0006: input,hidraw5: USB HID v1.11 Device [SIGMACHIP USB Keyboard] on usb-0000:03:00.0-5/input1
sd 2:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdd] 4096-byte physical blocks
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10
sd 2:0:0:0: [sdd] Attached SCSI disk
usb 1-8: new high-speed USB device number 4 using xhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
[drm] ib test on ring 5 succeeded
clocksource: Switched to clocksource tsc
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-D-2
[drm] HPD6
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
usb 1-8: New USB device found, idVendor=0951, idProduct=1653
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: DT 100 G2
usb 1-8: Manufacturer: Kingston
usb 1-8: SerialNumber: 001CC0EC350DBBC0A70B006A
usb-storage 1-8:1.0: USB Mass Storage device detected
scsi host12: usb-storage 1-8:1.0
[drm] fb mappable at 0xE0721000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:2d:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:2d:00.0 on minor 0
[drm] amdgpu kernel modesetting enabled.
usb 1-9: new full-speed USB device number 5 using xhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 1-9: New USB device found, idVendor=8087, idProduct=0aa7
usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata7: SATA link down (SStatus 0 SControl 300)
scsi 12:0:0:0: Direct-Access Kingston DT 100 G2 PMAP PQ: 0 ANSI: 0 CCS
sd 12:0:0:0: Attached scsi generic sg4 type 0
sd 12:0:0:0: [sde] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB)
sd 12:0:0:0: [sde] Write Protect is off
sd 12:0:0:0: [sde] Mode Sense: 23 00 00 00
sd 12:0:0:0: [sde] No Caching mode page found
sd 12:0:0:0: [sde] Assuming drive cache: write through
sde: sde1
sd 12:0:0:0: [sde] Attached SCSI removable disk
ata8: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sdd8): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
ip_tables: (C) 2000-2006 Netfilter Core Team
efivars: duplicate variable: DeploymentModeNv-97e8965f-c761-4f48-b6e4-9ffa9cb2a2d6
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sdd8): re-mounted. Opts: errors=remount-ro
systemd-journald[394]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ccp 0000:2e:00.2: enabling device (0000 -> 0002)
ccp 0000:2e:00.2: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
snd_hda_intel 0000:2d:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:2d:00.1: Force to non-snoop mode
snd_hda_intel 0000:2f:00.3: enabling device (0000 -> 0002)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input8
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input9
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input10
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input11
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input12
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input13
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/sound/card1/input14
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/sound/card1/input15
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/sound/card1/input16
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/sound/card1/input17
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/sound/card1/input18
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/sound/card1/input19
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:2f:00.3/sound/card1/input20
usbcore: registered new interface driver snd-usb-audio
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:27:00.0: enabling device (0000 -> 0002)
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370810225019140f2a
Bluetooth: hci0: Intel device is already patched. patch num: 2a
iwlwifi 0000:27:00.0: loaded firmware version 29.610311.0 op_mode iwlmvm
iwlwifi 0000:27:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
iwlwifi 0000:27:00.0: reporting RF_KILL (radio disabled)
iwlwifi 0000:27:00.0: base HW address: 88:b1:11:22:65:f0
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone0: failed to read out thermal zone (-5)
iwlwifi 0000:27:00.0 wlp39s0: renamed from wlan0
Adding 7115772k swap on /dev/sdd10. Priority:-1 extents:1 across:7115772k FS
EXT4-fs (sdd9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1525133596.909:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=970 comm="apparmor_parser"
audit: type=1400 audit(1525133596.910:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="udm-extractor" pid=987 comm="apparmor_parser"
audit: type=1400 audit(1525133597.118:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=972 comm="apparmor_parser"
audit: type=1400 audit(1525133597.118:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=972 comm="apparmor_parser"
audit: type=1400 audit(1525133597.118:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=972 comm="apparmor_parser"
audit: type=1400 audit(1525133597.118:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=972 comm="apparmor_parser"
audit: type=1400 audit(1525133597.119:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=971 comm="apparmor_parser"
audit: type=1400 audit(1525133597.119:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=971 comm="apparmor_parser"
audit: type=1400 audit(1525133597.129:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=969 comm="apparmor_parser"
audit: type=1400 audit(1525133597.130:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=990 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp42s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp42s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp39s0: link is not ready
igb 0000:2a:00.0 enp42s0: igb: enp42s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp42s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
xhci_hcd 0000:03:00.0: Cannot set link state.
usb usb2-port7: cannot disable (err = -32)
usb 2-7: USB disconnect, device number 2
usb 1-8: USB disconnect, device number 4
usb 2-7: new SuperSpeed USB device number 3 using xhci_hcd
usb 2-7: New USB device found, idVendor=8564, idProduct=1000
usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-7: Product: Mass Storage Device
usb 2-7: Manufacturer: JetFlash
usb 2-7: SerialNumber: 3580910131
usb-storage 2-7:1.0: USB Mass Storage device detected
scsi host11: usb-storage 2-7:1.0
scsi 11:0:0:0: Direct-Access JetFlash Transcend 16GB 1.00 PQ: 0 ANSI: 5
sd 11:0:0:0: Attached scsi generic sg2 type 0
sd 11:0:0:0: [sdc] 30871552 512-byte logical blocks: (15.8 GB/14.7 GiB)
sd 11:0:0:0: [sdc] Write Protect is off
sd 11:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 11:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
sdc: sdc1
sd 11:0:0:0: [sdc] Attached SCSI removable disk